Blog – This week I’m building two prototypes for a lowback stick chair for my next book. There’s a good chance this form will be a failure. But if I don’t try, then it definitely will be a failure.
Chair prototypes start with sketches and hours of staring at the hundreds of images I’ve collected from my travels, auction sales and images shared by brother and sister chair nerds.
Then I build a half-scale prototype with scrap wood, wire hangers and epoxy. I’m starting with a basic D-shaped seat, though that might change down the evolutionary path.
For this prototype, I found a better way to glue the wire hangers into the seat. In the before times, I would drill a slightly undersized hole, coat the end of the hanger with epoxy and tap it in. Then I’d dab some epoxy around the place where the hanger met the seat.
This was usually a strong-enough joint to bend the legs a few times. But sometimes the leg would come loose while bending it.
To fix that, I first drilled the hole for the hanger and followed that with a countersink. This created a bowl for the epoxy to pool. This greatly strengthened the joint, and I didn’t have to be gentle while bending the legs with pliers.
After settling on the rake and splay for the prototype, I visit my “boneyard” of chair parts. These are the bits I’ve accumulated after years of building chairs for customers and in classes.
Using leftover parts saves time, of course. But it also helps me visualize what’s right and wrong about a prototype. By using old legs at new angles, I can see clearly if I like the rake and splay without being distracted by a new leg shape.
Put another way: If I build a prototype with a new leg shape, new leg size, new stretcher orientation and new rake and splay, then it’s difficult to decide how to improve the chair. Is it the angles that are wrong? The leg shape? A combination of two factors?
It’s a cautious and slow approach, but I rarely hit a dead end as a result.
The other nice thing about this approach is that even a failed prototype isn’t a total loss. I can cut up the cherry, ash and oak parts and put them in my smoker with a pork shoulder and prototype me some pulled pork sandwiches.
— Christopher Schwarz
Share this:
Like this:
https://widgets.wp.com/likes/#blog_id=16956016&post_id=41013&origin=blog.lostartpress.com&obj_id=16956016-41013-5f5ae7e53d65bPosted in The Stick Chair Book, Uncategorized16 Comments
Making Book Part 9: Don’t be a Dumb Sheet
Posted on by Lost Art Press
Some of the entries in this “Making Book” series are deeply personal. Others are technical. This one is all business.
Printing and woodworking share similarities. The obvious: Both use trees as the most important raw ingredient, and a knowledge of wood, moisture and finishing is critical to doing things not completely stupidly.
The other similarity I run into all the time is how we optimize parts from a board the same way we optimize the size of a book to get an efficient number of pages per sheet of paper.
Quick example: Let’s say you have a pine 1×12 (which is actually 11-1/4″ wide) and you need to rip some trim pieces out for a baseboard. If you choose to make your baseboard 5-1/2″ wide, then you could easily get two pieces of baseboard from the 1×12 with only a little waste (depending on the width of your saw kerf). But if you made your baseboard 6″ wide, you would get only one piece of baseboard from the 1×12 and have a lot of waste/leftover material.
The same goes with books. The typical sheets of paper that we work with are 23″ x 35″ and 25″ x 38″. So if we order an 8.5″ x 11″ book, the press can print eight “leaves” (eight leaves equals 16 pages printed front and back) on that sheet. We print the 16 pages, fold it up into what’s called a “signature,” assemble all the signatures and trim it with little waste.
Let’s say you decided your book should be 8.5″ x 12″. That will almost double the cost of the book because of all the wasted paper involved.
If you do the math, you’ll find there are a lot of efficient sizes that can be squeezed onto this sheet of paper and produce signatures from four pages up to 64. And whether you know it or not, these sizes are also commonly paired with the type of information inside. Here’s a chart (which has been reproduced many times in my lifetime) on the sizes common to each genre:
- Fiction: 4.25″ x 6.87″, 5″ x 8″, 5.25″ x 8″, 5.5″ x 8.5″, 6″ x 9″
- Novella: 5″ x 8″
- Children’s: 7.5″ x 7.5″, 7″ x 10″, 10″ x 8″
- Textbooks: 6″ x 9″, 7″ x 10″, 8.5″ x 11″
- Non-fiction: 5.5″ x 8.5″, 6″ x 9″, 7″ x 10″
- Memoir: 5.25″ x 8″, 5.5″ x 8.5″
To some degree, this makes perfect sense. A Fabio-centric beach novel that was 11″ x 17″ would be pretty odd (though it would definitely add to the spf of your sunscreen and your knowledge of Fabio’s pore structure).
So if you want to save money on printing, pick an efficient size. Your graphic designer might be sad with your decision because odd-sized books are exciting to design, especially after you had to design 3,000 cookbooks that were 8.5″ x 11″. I get it.
You also have to pick your paper, which is a major expense in printing a book. This is more art than science. But there is some science. Paper is sold with a “basis weight.” This is why we talk about a book having #80 pages. The “#80” is pronounced as “80 pound.” And it means (broadly) that 500 full sheets (23″ x 35″ or 25″ x 38″) will weigh 80 pounds. (Paper nerds are now folding origami swords to stab me. Yes, I know there are different parent sheets for bond, book, text, index, bristol, and cover.)
Basically the bigger the number, the thicker the sheet. Paper can also be measured directly by thickness, called its “caliper” – just like woodworking!
Paper can be uncoated (like in a pulp novel or a newspaper) or coated (like in an expensive art book). Uncoated is far less expensive, in general, and more tactile. But image reproduction isn’t typically as crisp. Coated paper can be smoother, produce crisper images and have many different sheens. (What are papers coated with? It’s complicated.) Paper also has a lot of other characteristics, such as its whiteness and opacity.
I choose papers for our books based on the type of press and what that factory is happy using. A sheet-fed press (where the pages go through individually like a photocopier) is way different than a web press (where the paper is like a giant roll of toilet paper). Before I spec a paper for a Lost Art Press book, I request printed, finished examples from the press on the different papers I’m considering.
This allows me to be dumb-ish about the whole world of paper and its characteristics. I get to see the finished result and compare it to other papers printed by the same plant.
This allows you to get away from the “expensive and heavy papers are better” problem in book production. They’re not always better. There are sweet spots in print production, where a cheaper and thinner paper gives you a better result.
This is what allowed us to use a #70 matte coated paper for “The Anarchist’s Workbench” on a web press that was inexpensive but really really crisp. When I compared it directly to the pricey #80 paper, it was no contest.
Numbers are one thing. But there ain’t nothing like the real thing.
— Christopher Schwarz
Read other posts from the “Making Book” series here.
Share this:
Like this:
https://widgets.wp.com/likes/#blog_id=16956016&post_id=40638&origin=blog.lostartpress.com&obj_id=16956016-40638-5f5ae7e54098fPosted in Making Book, The Stick Chair Book11 Comments
On Nails
Posted on by fitz
In 2007, a lightweight box showed up on Christopher Schwarz’s desk from Joel Moskowitz, who runs the Tools for Working Wood store in Brooklyn, N.Y. Inside was “The Joiner and Cabinet Maker,” a book first published in 1839 on working wood by hand. It was one of a series of books that introduced young people to the basic knowledge of trade skills: baking, coopering, printing, joinery and more.
But it’s not only a how-to; it’s presented as an engaging fictional tale that tells us of young Thomas, a boy apprenticed to a joiner’s shop in a rural English town. He begins his apprentice years sweeping the shop, managing the hide glue pots and observing the journeymen.
Then (plot twist), Thomas is told to build a rough box for a customer who is leaving on a journey that same day. We get every step of the project, from stock selection to construction to delivery, when Thomas brings along an envelope of cut nails for the customer so he can secure the lid shut before his trip.
Thomas goes on to build a school box and finally a large chest of drawers, while he learns the joinery and personal skills to become a journeyman.
Chris and Joel re-published the book in 2009 (it is now on its fourth printing) – and to go along with the historic text (included in its entirety), Chris constructed all three projects, with step-by-step instructions and drawings, and Joel wrote a section that explores the social structure of England in 1839, and woodworking during the period.
It is available in hardcover and as a searchable PDF; it is also the only Lost Art Press audiobook – recorded by Roy Underhill. That project was at the request of a school for autistic children, so that students could listen then build the projects.
The following is excerpted from “The Joiner and Cabinet Maker,” by anonymous, Christopher Schwarz and Joel Moskowitz.
— Fitz
Most modern woodworking texts are silent on the topic of nails. Ernest Joyce, the author of the widely distributed book “Encyclopedia of Furniture Making” (Sterling), put it thus:
“Apart from panel and veneer pins, the furnituremaker has little use for nails except for softwood work etc.”
I couldn’t disagree more. While it is surely possible to build furniture without ever driving an iron nail through wood (just ask a Shinto temple builder), that is neither an expedient nor historically accurate approach to building traditional Western furniture.
Antiques of the highest caliber bristle with nails – you just have to know where to look. Examine the cabinet’s back for rosehead nails. Do you see how the moulding and cockbeading are attached? How about the glue blocks that support the entire case piece behind the feet? In some cases, even the dovetails are nailed. And though some might contend that nails in antique dovetails were part of a shoddy repair job, that’s not always the case.
But before you scoot down to the hardware store to pick up some nails, read on a little farther. Those might not be the right nails for you. The first recorded nails are Roman nails, which appeared about 5,000 years ago and had a good long 4,800-year run. Roman nails are basically square and taper on all four sides to a point. They were handmade.
I’ve used nails like this, and they are tricky. You need a pilot hole, and you have to place your nails so they are as far away from the ends of boards as possible because these nails wedge your work in all directions. So splitting your work is easy – unless the wood is green.
In my opinion, the best nails are those that Thomas used in “The Joiner and Cabinet Maker.” Thomas used cut nails, which are much different than both the Roman nails (sometimes called wrought nails) and the modern wire nails used in carpentry today.
Wire nails are made from long spools of wire – no surprises here. The wire flies through a machine that snips it to the proper length, then a machine “upsets” one end of the wire to create the head and sprays the fastener with some sort of adhesive or coating, depending on what the nail is to be used for.
So wire nails are either round or basically square in section (the square ones are used in pneumatic nail guns). They don’t taper in their length. They are incredibly cheap. They also don’t hold particularly tenaciously (with some exceptions), though they are excellent for carpentry or situations where you don’t need a bulldog grip.
Reproduction furniture makers who use hand-driven nails still typically use cut nails, just like Thomas did. Why are they called “cut” nails? These fasteners are sheared from a sheet of steel stock. (Imagine a Kit Kat candy bar being broken up into individual sticks. It’s a bit like that.) However, instead of being round or square, cut nails are rectangular in section; they taper in width but not in thickness.
Like Roman nails, cut nails require a pilot hole, and you want to mind the wedge shape. If you apply the wedging action against the end grain of your top board, the nail will hold well. If you apply the wedge into the face grain, you might split your work.
Cut nails were the nails of choice in the 19th century. They were made in large numbers at the beginning of the century but were driven to near-extinction by the less expensive and more convenient wire nails by the end of the century.
In the “The Joiner and Cabinet Maker,” the reader is advised to learn how to straighten cut nails that have been bent and then discarded. This activity might seem like quaint parsimony, until you’ve bought a few boxes of these fasteners. Modern cut nails are made using the same machines and processes as they were in the 19th century and, as a result, they are expensive.
I pick up every nail I drop. I straighten (or try to) every nail I bend. It’s a bit of a meditative skill. Tap the nail with a lightweight hammer while holding the fastener on an anvil or a steel plate. Many small taps are better than one mighty blow.
And one more piece of advice: If you cannot save the entire nail, snip off a straight section and use that as a headless brad for finer work.
If you can’t afford cut nails, the next best thing is to buy cement-coated wire nails (which are actually coated with a heat-activated resin). Furniture maker Jeff Headley uses these, and he modifies the head by beating them with a hammer on an anvil to give the head a squarish shape. When installed, these hold well and look like cut nails.
How to Choose the Right Nail
The number of styles of cut nails is bewildering, and they all look similar and have odd designations for their lengths. Even today, nails are sold using the original pennyweight system.
What you need to know about the pennyweight system today is that a 2-penny nail (and “penny” is typically abbreviated as d) is 1″ long. Each additional pennyweight adds a 1/4″ to the length of the nail on up to 10d nails, which are 3″ long. (Nails longer than 3″ are sold differently. If you need nails longer than 3″, however, you’re not a furniture maker.)
Naturally, you are wondering what length of nails you should stock up on to build furniture. Most of my furniture work requires 4d (1-1/2″ long) and 6d (2″-long) nails. There is a formula you can use, however, to arrive at this same conclusion.
Whenever you nail two boards together there is a board on top and board below. It’s the board on top that you want to pay attention to when selecting a nail. How thick is this board in “eighths?” A 1/2″-thick board is, for example, four eighths. A 3/4″-thick board is six eighths. Convert that number to pennyweight. So to fasten a 1/2″-thick board, use a 4d nail. To fasten a 3/4″-thick board use a 6d nail.
Of course, pay some attention to the board on bottom – you don’t want the nail’s tip to poke out the other side.
So now you know what lengths you need. What about all the different styles of nails? There are three commonly available styles of nails that I use to build furniture. And there is one style of nail that is difficult to find (in the Midwest, at least) but easy to make. Here are the four styles and what they are good for. I’m going to use the names that Tremont Nail Co. (tremontnail.com or 800-835-0121) uses because that company is by far the largest modern-day supplier of cut nails.
Fine Finish Standard Nail: This type of nail holds carcases together. It has a pronounced taper and a large head, so it will wedge up your workpieces well and hold tightly. Its strong wedge is a two-edged sword. It also will readily split your work if you aren’t cautious.
Cut Headless Brads: These slender nails are excellent for attaching moulding. They don’t have as pronounced a taper and are skinny things, so they aren’t suitable for full-scale case construction. But their scrawniness is ideal for jobs where the nail head will show, such as attaching face frames (with the assistance of glue). I typically add a 3/16″ bead detail to my face frames, and these nails sneak into the quirk of the bead nicely. Note that the maker says these brads are headless; that’s not entirely true. They have a small head.
Clinch Rosehead Standard: Rosehead nails are great for attaching cabinet backs or anywhere you want the nail head to shout, “I’m a nail.” There also is a version of this nail (that is more expensive) called a “wrought head nail” that has a black finish and a head that looks hand-finished. Use this nail when you want to shout, “I’m an old nail.”
Sprigs: You’ll see this nail mentioned many times in “The Joiner and Cabinet Maker.” Sprigs are headless nails or nails that have a head on only one side of the nail – they make something of an “L” shape. I have yet to find a reliable source for these nails, so I make my own by clipping the heads off of the cut headless brads listed above. Sprigs, as you will find out, are great for attaching delicate mouldings or for lightweight structural applications.
Using cut nails involves some know-how and a special shopmade tool, which we’ll cover in building the Packing Box, the first project in “The Joiner and Cabinet Maker.”